Optimus Prime Rise of the Beasts Signature Robot (Limited Edition)
- Limited edition, the ultimate collector's experience
- Endless fun with app interaction
- Exclusive dialogue crafted with Peter Cullen
- Aerial Showcase with Dynamic Actions
Rise with The Beast And Robosen
Now packed in a more compact Optimus Prime.
Screen to Reality, An Authentic Experience
Optimus Prime stands victorious at 16" tall after fighting the Predacons alongside the Maximals, in this ultra-realistic representation of the global blockbuster, Rise of the Beasts!
Two Programming Modes
Choose from Block-Based / Manual programming modes to unleash your creativity.
Exclusive Dialogue Crafted With Peter Cullen
Robosen has invited the renowned voice actor Peter Cullen, to provide the voice for the Optimus Prime Signature Series. Moreover, Cullen has recorded exclusive dialogue specifically for this Optimus Prime.
What's in the box
Product Specification
135×237×423 mm (5.3×9.3×16.6 in)
1.6 kg (3.5 lb)
ABS,PC,PA66+30%GF,Aluminum Alloy
21
Bluetooth BLE 5.0
Mobile app & Voice Control
Type-C
1650mAh
Input: 100-240V～50/60Hz 0.8A
Output: 5V=3A/9V=3A/12V=2.5A15V=2A/20V=1.5A
MAX 30W
FAQ
Why can't the Optimus Prime ROTB Robot walk or transform?
Robosen's Signature Series robots are designed to bring the cinematic experience one step closer to reality. The hyper-realistic cinematic rendering can now be visualized on every individual part of ROTB Optimus Prime, which were all painstakingly hand painted to bring the movie magic alive. A balance was achieved to infuse Robosen's robotics engineering to make the experience still dynamic and interactive, while preserving movie authenticity.
Unable to wake up or control the robot by using voice commands.
Ensure that the robot is in an environment without a lot of sound interference; Use preset voice commands to wake up or control the robot. For details, please refer to the voice command table in APP or instruction manual.
Robots fall or get stuck when they walk or do certain actions.
Ensure the robot is used on a smooth surface with low friction. If the problem persists after multiple restarts, please contact after-sales support for help.
The robot cannot be turned on.
Ensure the robot is fully charged; press and hold the power button until the robot finishes its prompt, then releases the power button.
The robot cannot be charged.
Make sure to use the original adapter. Plug the adapter into the robot and connect it to the power source. The adapter's red light should stay on while charging, and turn off when the robot's battery is fully charged.
The APP cannot find the robot.
Ensure the robot is turned on and not connected to other mobile phones. Make sure Bluetooth is enabled on your phone or tablet, and all permissions required by the APP are granted.
Charging time and operating time of the robot.
When the red light turns off, it indicates that the battery has reached the standard usage level. The charging time is approximately 120 minutes, and the operational time is around 100 minutes.
The robot reports that one of the joints is stuck.
Please restart the robot and ensure it is used on a smooth surface with low friction, and it's not obstructed by any obstacles.
The robot reports that one of the joint cables is disconnected.
Please restart the robot first. If the problem persists after several restarts, please contact after-sales support for help.
The robot has no sound.
Please connect the APP to check if the robot's volume has been turned down.